Opentrack göz takip sistemi için ETS2 Ayarları

Opentrack ETS2’de en verimli şekilde kullanmak isterseniz aşağıdaki ayarları uygulamanız önerilir. Ayar dosyası oluşturmak için programı çalıştırın. Sağ kısımda yer alan profile bölümüne tıklayın.

Buradan Create New Empty config seçeneğine tıklayın ve bir isim verin. ets2.ini olabilir. Ardından aynı butona tıklayarak Open configuration directory seçeneğini seçin, açılan yerde yeni oluşturulan ets2.ini dosyasını not defteri ile açıp, aşağıdaki ayarı girin.

[Tracking]
Smooth=1
invertYaw=true
invertPitch=false
invertRoll=false
invertX=false
invertY=false
invertZ=false
minSmooth=25
powCurve=1
maxSmooth=80

[GameProtocol]
DLL=FTNoIR_Protocol_FT.dll
Selection=2

[KB_Shortcuts]
Keycode_Center=199
Shift_Center=false
Ctrl_Center=false
Alt_Center=false
Keycode_StartStop=207
Shift_StartStop=false
Ctrl_StartStop=false
Alt_StartStop=false
MouseKey_Center=0
Disable_Beep=false
MouseKey_GameZero=0
Keycode_GameZero=0
Shift_GameZero=false
Ctrl_GameZero=false
Alt_GameZero=false
MouseKey_StartStop=0
SetZero=true
SetEngineStop=true
MouseKey_Inhibit=0
Keycode_Inhibit=0
Shift_Inhibit=false
Ctrl_Inhibit=false
Alt_Inhibit=false
Inhibit_Pitch=false
Inhibit_Yaw=false
Inhibit_Roll=false
Inhibit_X=false
Inhibit_Y=false
Inhibit_Z=false
Enable_ReverseAxis=false
RA_Yaw=40
RA_ZPos=-20
RA_ToZPos=50

[PPJoy]
Selection=1

[FSUIPC]
LocationOfDLL=C:/Program Files/Microsoft Games/Flight Simulator 9/Modules/FSUIPC.dll

[TrackerSource]
Selection=1
DLL=FTNoIR_Tracker_PT.dll
2ndDLL=None

[Curves-Yaw]
point-count=1
point-0-x=50
point-0-y=119
point-1-x=50
point-1-y=180

[Curves-PitchUp]
point-count=1
point-0-x=50
point-0-y=49

[Curves-PitchDown]
point-count=1
point-0-x=50
point-0-y=50.5

[Curves-Roll]
point-count=0
point-0-x=26.25
point-0-y=49

[Curves-X]
point-count=2
point-0-x=30
point-0-y=20
point-1-x=50
point-1-y=50

[Curves-Y]
point-count=2
point-0-x=29.75
point-0-y=21
point-1-x=50
point-1-y=50

[Curves-Z]
point-count=2
point-0-x=30.5
point-0-y=22
point-1-x=50
point-1-y=50

[Filter]
DLL=FTNoIR_Filter_Accela.dll

[SMTracker]
FilterLevel=1
EnableRoll=true
EnablePitch=true
EnableYaw=true
EnableX=true
EnableY=true
EnableZ=true

[Accela]
Reduction=100
ewma=0
rotation-deadzone=0
rotation-threshold=50
translation-deadzone=0
translation-threshold=49

[Curves-Accela-Scaling-Rotation]
point-count=12
point-0-x=0
point-0-y=0
point-1-x=0.308900523560209
point-1-y=0.0666666666666667
point-2-x=0.565445026178011
point-2-y=0.226666666666667
point-3-x=0.769633507853403
point-3-y=0.506666666666667
point-4-x=0.994764397905759
point-4-y=1
point-5-x=1.23560209424084
point-5-y=1.61333333333333
point-6-x=1.47643979057592
point-6-y=2.37333333333333
point-7-x=1.66492146596859
point-7-y=3.12
point-8-x=1.80628272251309
point-8-y=3.92
point-9-x=1.91623036649215
point-9-y=4.70666666666667
point-10-x=2.00523560209424
point-10-y=5.44
point-11-x=2.07329842931937
point-11-y=6

[Curves-Accela-Scaling-Translation]
point-count=10
point-0-x=0
point-0-y=0
point-1-x=0.282722513089005
point-1-y=0.08
point-2-x=0.492146596858639
point-2-y=0.306666666666667
point-3-x=0.764397905759162
point-3-y=0.84
point-4-x=1.00523560209424
point-4-y=1.62666666666667
point-5-x=1.17277486910995
point-5-y=2.78666666666667
point-6-x=1.25130890052356
point-6-y=3.6
point-7-x=1.31937172774869
point-7-y=4.29333333333333
point-8-x=1.38219895287958
point-8-y=4.90666666666667
point-9-x=1.43455497382199
point-9-y=5.65333333333333

[PointTracker]
CameraId=0
CameraF=1
CameraResX=320
CameraResY=240
CameraFPS=30
CameraPitch=-11
PointExtractThreshold=51
PointExtractMinSize=4
PointExtractMaxSize=50
PointModelM01x=0
PointModelM01y=40
PointModelM01z=-30
PointModelM02x=0
PointModelM02y=-70
PointModelM02z=-80
tMHx=-85.94847869873047
tMHy=-72.17801666259766
tMHz=56.182228088378906
DynamicPoseResolution=true
VideoWidget=true
SleepTime=10
ResetTime=1000
EnableRoll=false
EnablePitch=true
EnableYaw=true
EnableX=true
EnableY=true
EnableZ=true

[PointTrackerDialog]
ActiveModelPanel=0
CustomM01x=0
CustomM01y=40
CustomM01z=-30
CustomM02x=0
CustomM02y=-70
CustomM02z=-80
ClipTopHeight=40
ClipTopLength=30
ClipBottomHeight=70
ClipBottomLength=80
CapHalfWidth=45
CapHeight=70
CapLength=110

[opentrack-ui]
button-center=0
button-restart-tracking=-1
button-start-tracking=-1
button-stop-tracking=-1
button-toggle=-1
button-toggle-press=-1
button-toggle-tracking=-1
button-zero=-1
button-zero-press=-1
camera-pitch=6
camera-roll=0
camera-yaw=0
center-at-startup=true
centering-method=0
compensate-translation=false
compensate-translation-disable-z-axis=false
filter-dll=Accela
guid-center={0CB21B40-D72C-11E5-8002-444553540000}
guid-restart-tracking=
guid-start-tracking=
guid-stop-tracking=
guid-toggle=
guid-toggle-press=
guid-toggle-tracking=
guid-zero=
guid-zero-press=
keycode-center=
keycode-restart-tracking=
keycode-start-tracking=
keycode-stop-tracking=
keycode-toggle=End
keycode-toggle-press=
keycode-toggle-tracking=
keycode-zero=
keycode-zero-press=
pitch-alt-axis-sign=false
pitch-invert-sign=false
pitch-source-index=4
pitch-zero-pos=0
protocol-dll=freetrack 2.0 Enhanced
roll-alt-axis-sign=false
roll-invert-sign=false
roll-source-index=5
roll-zero-pos=0
tracker-dll=PointTracker 1.1
use-system-tray=false
x-alt-axis-sign=false
x-invert-sign=false
x-source-index=0
x-zero-pos=0
y-alt-axis-sign=false
y-invert-sign=false
y-source-index=1
y-zero-pos=0
yaw-alt-axis-sign=true
yaw-invert-sign=false
yaw-source-index=3
yaw-zero-pos=0
z-alt-axis-sign=false
z-invert-sign=false
z-source-index=2
z-zero-pos=0
compensate-translation-disable-x-axis=false
neck-enable=false
neck-height=0
use-camera-offset-from-centering=true
relative-translation-mode=0

[proto-freetrack]
close-protocols-on-exit=false
use-memory-hacks=false
used-interfaces=0

[tracker-pt]
active-model-panel=0
automatic-threshold=true
camera-fov=75
camera-fps=60
camera-name=Venus USB2.0 Camera [7_6d51435_0_0000]
camera-res-height=480
camera-res-width=640
cap-x=40
cap-y=60
cap-z=100
clip-by=75
clip-bz=75
clip-ty=35
clip-tz=30
dynamic-pose-resolution=false
init-phase-timeout=500
m_01-x=0
m_01-y=0
m_01-z=0
m_02-x=0
m_02-y=0
m_02-z=0
max-point-size=6
min-point-size=1
model-centroid-x=-123
model-centroid-y=56
model-centroid-z=42
threshold-primary=26
threshold-slider=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0@:\0\0\0\0\0\0\0\0\0\0\0\0\0\0@o\xe0\0\0\0\0\0)

[Curves-rx]
point-count=1
point-0-x=40.091848450057405
point-0-y=100.65116279069768

[Curves-rz]
point-count=1
point-0-x=180
point-0-y=0

[Curves-tx]
point-count=1
point-0-x=100
point-0-y=50.88372093023256

[Curves-ry]
point-count=1
point-0-x=138.08151549942596
point-0-y=180

[Curves-ty]
point-count=1
point-0-x=100
point-0-y=50.95348837209303

[Curves-ry_alt]
point-count=1
point-0-x=20.66590126291619
point-0-y=180

[Curves-tz]
point-count=1
point-0-x=100
point-0-y=50.627906976744185

[Curves-rx_alt]
point-count=2
point-0-x=32.23880597014926
point-0-y=100.61682242990655
point-1-x=38.678530424799085
point-1-y=180

[migrations]
last-migration-at=20220126_00~

[modules]
filter-dll=accela
protocol-dll=freetrack
tracker-dll=udp

[opentrack-mappings]
pitch-alt-axis-sign=false
roll-alt-axis-sign=false
x-alt-axis-sign=false
y-alt-axis-sign=false
yaw-alt-axis-sign=true
z-alt-axis-sign=false
y-max-value=30
yaw-max-value=180
z-max-value=30
x-max-value=30
pitch-max-output-value=-180

[accela-sliders]
ewma=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0@$\0\0\0\0\0\0\0\0\0\0\0\0\0\0@i\0\0\0\0\0\0)
rotation-deadzone=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0?\x94z\xe1G\xae\x14{\0\0\0\0\0\0\0\0?\xb9\x99\x99\x99\x99\x99\x9a)
rotation-nonlinearity=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0)
rotation-sensitivity=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0?\xe4\xcc\xcc\xcc\xcc\xcc\xcd?\xc9\x99\x99\x99\x99\x99\x9a@\x4\0\0\0\0\0\0)
translation-deadzone=@Invalid()
translation-sensitivity=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0?\xd6\x66\x66\x66\x66\x66\x66?\xa9\x99\x99\x99\x99\x99\x9a?\xf8\0\0\0\0\0\0)

[spline-X]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x1@>\0\0\0\0\0\0@)\0\0\0\0\0\0)

[spline-Y]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x1@>\0\0\0\0\0\0@)\0\0\0\0\0\0)

[spline-Z]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x1@>\0\0\0\0\0\0@)\0\0\0\0\0\0)

[spline-yaw]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x1@Q\x8c\xcc\xcc\xcc\xcc\xcd@f\x80\0\0\0\0\0)

[alt-spline-yaw]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x2@4\0\0\0\0\0\0@I\0\0\0\0\0\0@K\x80\0\0\0\0\0@f\x80\0\0\0\0\0)

[spline-pitch]
points=@Variant(\0\0\0\x7f\0\0\0\xfQList<QPointF>\0\0\0\0\x1@V\x80\0\0\0\0\0@f\x80\0\0\0\0\0)

[kalman-filter]
noise-rotation-slider=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0)
noise-position-slider=@Variant(\0\0\0\x7f\0\0\0\x18::options::slider_value\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0)

Eğer ben direkt indirip atmak istiyorum diyorsanız config klasörüne aşağıdaki bağlantıdan zip dosyasını indirip içerisindeki kamyonyama.ini dosyasını atıp çalıştırabilirsiniz.